UNI EN 14385 • CEN/TS 13649 • UNI EN 12919 • UNI EN 13284 • UNI EN 1911 • UNI EN 13211 • UNI N 14790 • ISO 9096 • UNI EN 16911
Regolazione del Flussimetro
Presa di Rete
Bravo Plus is the renewed version of the portable constant flow rate sampler of TCR Tecora.
Bravo Plus è is the renewed version of the portable constant flow rate sampler which incorporates a controller module with microprocessor. Its versatility, united to its wide sampling capability, makes it suitable for dust and gas sampling either in stack or in ambient. Its updated electronic system allows the samplings to be programmed with the real date and hour. The volume and temperature values are measured electronically at the dry gas meter during the sampling. At the end of the sampling, the instrument performs the volume normalization and prepares the detailed report of the measuring. Through a wide matrix display, it is possible to visualise all the measurements, at any moment. Thanks to an RS232 interface, all the contents of the memory (more than 60 samplings) may be downloaded on PC. By installing the sequential interface (*) it is possible to control the sequential manifolds for the dust and gas sampling up to 24 samples. The Bravo Plus is available with two different pump types, a “rotary vane”, and a “membrane” pump.
Wide flow rate range
Pulsation free linearized flow
Built-in dry gas meter
More than 60 sampling Reports can be memorized, and displayed or transferred on PC
Permanent date and hour programming
Power loss management by memorizing the events in the final report